"UNIVERSAL BENT TUBE"
IF YOU CAN WELD AND WORK WITH METAL I CAN SUPPLY YOU WITH BENT TUBING TO YOUR
SPECIFICATION. WITH A BASIC "EBAY" $30 NOTCHER, WELDER, AND A LITTLE SKILL YOU CAN MAKE
YOUR OWN BUMPERS, ROCK SLIDERS, ROLL CAGES, SHOCK HOOPS, ETC. I CAN CURRENTLY BEND 1.5", 1.75",
AND 2" TUBES..... BELOW I'LL DESCRIBE "BASICALLY" WHAT YOU NEED TO DO SO THAT I CAN SET YOU UP
WITH YOUR PRE-BENT PIECES.

---

"PRICE AS FOLLOWS WITH CURRENT, INCREASING DAILY, STEEL PRICES!!!!"
EACH BEND COSTS $10

PRICES PER FOOT.........
1.50" X .120" HREW= $3.75
1.75" X .120 HREW= $4.00
2.00" X .120 HREW= $4.50

SHIPPING CAN BE ANYWHERE FROM $10 TO $60 ACROSS THE COUNTRY
OTHER WALL THICKNESS AND MATERIAL CHOICES WILL BE QUOTED PER ESTIMATE.
I CAN BEND UP TO .25" WALL TUBE

---

YOU WILL NEED.......... #1 SUITABLE SIZE PIECE OF LARGE MASKING PAPER
#2 BLACK MARKER
#3 LONG STRAIT EDGE, RULER, ETC.
#4 SUITABLE LENGTH(4'?) OF WIRE STOCK, STRAIT COAT HANGER, ETC.
#5 SMALL RULER OR TAPE MEASURE

---

#1 USE THE PIECE OF WIRE AND BEND THE APPROXIMATE ANGLE FOR THE BEND YOU NEED.
IF MULTIPLE BENDS ARE NEEDED ON THE SAME PLANE YOU CAN DO THAT TOO.

#2 LAY THE PIECE OF WIRE ON THE MASKING PAPER AND TRACE THE ANGLE TO THE PAPER

#3 WITH THE STRAIT EDGE AND RULER DRAW A SCALE ILLUSTRATION OF THE PIECE OF
BENT TUBE THAT YOU NEED. (ILLUSTRATION BELOW) YOU WON'T HAVE TO DRAW
THE BEND ITSELF. A SHARP CORNER WILL DO.

#4 MAKE SURE TO MARK DOWN HOW MANY PIECES OF EACH ARE NEEDED AND WHAT
SIZE THEY ARE.

#5 BE SURE TO ADD EXTRA LENGTH TO EACH PIECE JUST IN CASE

#6 REPEAT PROCESS FOR REMAINING PIECES, PUT PIECE OF MASKING PAPER IN AN
ENVELOPE AND MAIL TO ME. IT'S THAT EASY........ CALL OR EMAIL FOR ADDRESS
AND OTHER QUESTIONS.........

---

PIECE OF MASKING PAPER WILL LOOK LIKE THIS (OUTLINE OF TUBES ONLY)